TDSB35

Features
-
MCU control, ultra-low power consumption when standby.
-
The charging principle adopts a three-stage charging algorithm, which performs a balanced charging of the battery once a week, effectively preventing the battery from being unbalanced and vulcanized, and improving the service life of the battery.
-
Power MOSFET as an electronic switch without any mechanical switch, no protection action delay
-
Green and Red LED light indication for charge and discharge; discharge light control + timing, pure light control, manual adjustment on the ALWAYS ON mode
Peak power (Pmax)
60W Test criteria Irradiance
1000W/M2
Operating
current 1.66(A)
Crest voltage (Vmp)
18(V)
Max system
voltage 600(V)
Open-circuit
voltage 21.4 (V)
Short-circuit current
1.83(A)
Solar Cell
Quantity 36(4*9) Dimension 26*21*1(inch)
Glass
3.2mm
(Ultra-white textured tempered glass)
Frame
Aluminum alloy frame Strong impact resistance
Weight 8.4lb
Charging Mode ......................................................PWM mode
System Current ..................................................................3A
System Voltage.......................................... 7.4V、11.1V、14.8V
Power Input........................................... ≤18W、≤18W、≤36W
Input withstand voltage ..................................................≤25V
Overload protection/Short circuit ....... 1.5 times rated current delay for 5 minutes off,
Protection ......................Automatic recovery after 5 minutes;
≥3 times rated current short circuit protection action
Charge loop drop ..........................................................≤0.7V
Discharge circuit voltage drop...................................... ≤0.1V
Overvoltage protection voltage .................5.5(3.7V), 9.4 (7.4V), 13.6(11.1V), 17.8(14.8V)
Overvoltage recovery voltage ..................5.0(3.7V)、8.9(7.4V) 13.1(11.1V)、17.3(14.8V)
Charge cut-off Voltage .........................4.2(3.7V) 、8.4(7.4V)、 12.6(11.1V) 16.8(14.8V)
Over-discharge protection Voltage .......3.2(3.7V)、6.0(7.4V)、 9.0(11.1V)、12.0(14.8V)
Over-Discharge Recovery Voltage.......... 3.7(3.7V)、7.4(7.4V)、 11.1(11.1V)、14.8(14.8V)
Charging Return Voltage...... 3.7(3.7V)、7.4(7.4V)、11.1(11.1V)、 14.8(14.8V)
Daytime identification voltage ..............3.0(3.7V)、3.5(7.4V)、 7(11.1V/14.8V)
Night identifying voltage ....1.0 (3.7 V)、1.5(7.4V)、3(11.1V/14.8V)
Operation Temperature...................................... -30°C~+55°C
Storage Temperature......................................... -45°C~+70°C
Operating Relative Humidity........ ≤90%RH、no condensation
IP Grade .......................................................................... IP30
External Dimensions....................................... 2.1*2.7*.86 inch
Installation Cabling ......................................AWG22~14/2mm2
Weight .......................................................................0.032kg